Within specialist both in wet grinding and dry grinding expertise. Our grinding mill would work for the most wide-ranging bulk materials, construction minerals and iron ore milling. MXB Coarse Powder Mill is a kind of new high-tech milling equipment to satisfy the requirements of coarse powder processing clients. It’s the ideal products to replace Raymond Mill, ball mill, along with other traditional mill which ideal process fine powder materials. It is high-efficiency equipment and widely needed in quartz sand, silica sand, foundry sand, fine sand and other sand abrasive business. When you are a component of closed production lines, it may give you a variety of size products of better effect.
Our coarse powder mill specializes in the following characteristics:
1) As materials fall from top to bottom, roller and ring are equally worn. Thus the grinding mill’s life span might be Three times higher than those of Raymond Mill;
2)When utilized in sand making plant, the coarse grinding mill will greatly enhance the area of crushed sand;
3)This grinding machine may be used as pre-grind equipment before ball mill which boosts the whole efficiency by 50%;
4)Suitable for crushing those non-inflammable and non-explosive brittle materials with Mohs Hardness under 9.
Working Principle
Step in main shaft, bulk disk and roller bracket is forced by motor over reducer. Installed above bracket, roller construction rotates with main shaft and swings honestly meantime, this bring in a giant centrifugal force, which scatters bulk materials evenly in milling intermediate layer between central roller and ring. The majority materials are grinded into powder and fall at the base, after that discharged from discharging opening according to the affect as to synchronously-rotating remover.
Technical Data
| Model | MXB904 | |
|---|---|---|
| Number of Roller | 4(piece) | |
| Maximum Feeding Grain Size | <30 mm | (Hard Material)<20mm |
| Open Circuit finished sized | 70 – 90 % < 2 mm | Adjustable, reference Instruction below |
| Open System Capacity | 8 – 15 t/h | Be involved with the average size and hardness of the feeding |
| Main Motor Powder | 37 – 45 KW | Fines， Low production with small motor |
| Main Motor Model | Y225-4 | 45KW |
| Elevator Power | 3X1.1 KW | |
| Contour (LXWXH) | 2.01X2.03X2.79(m) | Including main motor gear box main unit |
| Maximum Lifting weight of Single Piece | 4.81 | Refer to the individual pieces can not be disconnected |
| Cross Weight (Except Electric) | 13.71 |
| Name | Model | Power | Description |
|---|---|---|---|
| JC Jaw Crusher | JC250×1000 | 30kW | Speed≥1m/s |
| Bucket Elevator | TH250 | 3kW | |
| Vibrating Feeder | GZ3F | 0.2kW | Space between inlet and outlet is 1000 |
